轉輪除濕機可以解決您以下實際的問題
1、防止結露：如果空氣中的露點溫度低于物體表面的溫度。物體表面就不會產生結露現象。結露可能導致產生腐蝕或者電路系統的短路等一系列問題。
2、防止物品受潮變質：藥品、食物、砂糖和其他容易潮物品的質量只有在相對濕度低的環境中才能得到保證。如果您的產品易吸潮變質，那么您就應該考慮除濕了。有些產品要求非常低濕的環境（如即溶飲料），則必須使用吸附式除濕機。
3、減少臭味：如果相對濕度低于50%，難聞的氣味就會減少。例如在污水處理站安裝除濕機就可控制氣味的擴散。
4、防腐蝕：鋼鐵在相對濕度低于50%的情況下不容易生銹。對于保護您的資產來說除濕是比涂保護漆更有效且更經濟的的選擇。例如橋梁、電站、船舶（維護用運行期間）和離岸建筑等都是最典型的除濕應用。
5、建筑除濕：無論是新落成還是發生過水害的建筑，最有效的方法就是采用吸附除濕。加熱只是將水蒸氣轉移到建筑物的其他部位，加熱通風又會造成高能耗。吸附除濕是建筑物除濕中節能有效的辦法�！�
6、防止發霉：當周圍空氣的相對濕度低于70%時，就可防止物體發霉。在有的情況下除濕是非常重要的，如木制產品倉儲。在在帶有地下室的房屋中一般也需要安裝除濕機。
7、細菌：細菌需要在潮濕的環境中生存和繁殖。易吸濕物質通常都是細菌繁殖的溫床。若環境空氣的相對溫度在50%以下，絕大多數細菌將無法繁殖。
The rotary dehumidifier can solve the following practical problems.
1, prevent condensation: if the dew point temperature in the air is lower than the temperature on the surface of the object. There will be no condensation on the surface of the object. Condensation may cause a series of problems such as corrosion or short circuit system.
2. Prevent the goods from dampness and deterioration: The quality of medicines, food, sugar and other damp-prone articles can only be guaranteed in low relative humidity environment. If your product is easy to absorb moisture and deteriorate, you should consider dehumidification. Some products require very low humidity environments, such as instant drinks, and must use an adsorption dehumidifier.
3, reduce odour: if the relative humidity is below 50%, the odour will be reduced. For example, the installation of dehumidifiers at sewage treatment stations can control the spread of odors.
4. Corrosion protection: steel does not rust easily when the relative humidity is less than 50%. Dehumidification is a more effective and economical option for protecting your assets than coating varnish. For example, bridges, power stations, ships (during maintenance and operation) and offshore buildings are the most typical dehumidification applications.
5. Building dehumidification: the most effective method is to use adsorption dehumidification, whether it is a newly built or a waterlogged building. Heating is only transferring steam to other parts of the building. Heating and ventilation will result in high energy consumption. Adsorption dehumidification is an effective way to save energy in building dehumidification.
6, prevent moldy: when the relative humidity of the surrounding air is below 70%, it can prevent mould from becoming moldy. In some cases, dehumidification is very important, such as storage of wooden products. Dehumidifiers are usually installed in houses with basement.
7, bacteria: bacteria need to survive and reproduce in a humid environment. Hygroscopic substances are usually hotbeds of bacterial breeding. If the relative temperature of ambient air is below 50%, most bacteria will not be able to reproduce.
|
